CAS:109578-44-1 | Polyepoxysuccinic Acid(PESA)

PESA(CAS:109578-44-1) is suitable for oil field water injection, boiler water treatment and other fields; suitable for circulating cooling water systems in steel, petrochemical, electric power, pharmaceutical and other industries; especially suitable for boiler water treatment of high alkalinity, high hardness, high pH, high concentration multiple systems , circulating cooling water treatment, seawater desalination, membrane separation and other fields; suitable for the detergent industry. When PESA(CAS:109578-44-1) is used in the field of water treatment, the dosage is generally 10-30mg/L. When PESA is used as a dispersant, the recommended dosage is 0.5-3.0%. The specific dosage can be determined according to experiments. Since this product is anionic, it should not be used with cationic chemical additives.

CAS:22036-77-7 | Ethylene Diamine Tetra (Methylene Phosphonic Acid) Sodium Salt(EDTMPS)

When EDTMPS is added alone in circulating cooling water, the general dosage is 2-10 mg/L. EDTMPS and HPMA can be used for water treatment in low-pressure boilers after being mixed in a ratio of 1:3. EDTMPS can also be used in combination with BTA, PAAS, zinc salts, etc.

CAS No. 16039-53-5 | Zinc lactate

Name: Zinc lactate CAS No.16039-53-5 MF:C6H8O6Zn MW:241.5 Purity:98% Package: 5g,25g,200g,500g,1kg Worldwide Delivery

Sand Control Fluid Modifier

Sand Control Fluid Modifier is a strong cationic polyelectrolyte with a colorless to light yellow viscous liquid appearance. The specific gravity is about 1.02g/cm3, and the decomposition temperature is 150℃. Easily soluble in water and non-flammable. A small amount of this product can be closely adsorbed to the surface of clay minerals in sandstone oil layers through physical and chemical effects, and enhance the clay's corrosion resistance and erosion resistance. The cationic modifier of sand control fluid is resistant to acids, alkalis and salts; it is insoluble in oil and hydrocarbons, has strong resistance to oil washing, and will not undergo wetting reversal.

Cationic Improver of Drilling Agent

Cationic Improver of Drilling Agent is a cationic quaternary ammonium salt polymer surfactant, which appears as a colorless to light yellow viscous liquid. Easily soluble in water, non-toxic, with good hydrolytic stability and strong adaptability to changes in pH value. The freezing point is about -2.8℃, the specific gravity is about 1.04g/cm3, and the decomposition temperature is 280-300℃. When cationic surfactants coat the surface of clay, soda clay or salt-resistant clay, the clay can be dispersed in the oil. The cationic modifier has good rheology and chip-carrying ability, can maintain the well wall, and has anti-sticking and anti-mud bag properties.

Cationic Clay Stabilizer

Cationic Clay Stabilizer is a strong cationic accumulation electrolyte with a colorless to light yellow viscous liquid appearance. The specific gravity is about 1.02g/cm3 and the decomposition temperature is 150°C. The cationic viscosity stabilizer forms a film firmly on the surface of clay minerals by neutralizing the negative charges on the clay surface, preventing the hydration, dispersion and migration of swelling clay minerals. It is resistant to water erosion to extend the water injection cycle, and can achieve good results in increasing oil wells and water wells. Effect. Cationic viscosity stabilizer has good compatibility with other fracturing fluids, acidifying fluids, etc.

Cationic Additive in Acid and Fracturing Fluid

Cationic Additive in Acid and Fracturing Fluid is a cationic quaternary ammonium salt polymer surfactant, which appears as a colorless to light yellow viscous liquid. The cationic additive for fracturing acidizing fluid is easily soluble in water, safe and non-toxic, has good hydrolytic stability and strong adaptability to changes in pH value; freezing point -2.8°C, specific gravity 1.04g/cm3, and decomposition temperature 280-300°C. When the rock formation is fractured and acidified, clay mineral hydration and particle expansion and migration will occur, leading to formation blockage and a decrease in oil recovery. Cationic additives in the fracturing acidizing fluid can inhibit the hydration expansion and particle migration of clay, improve the effect of fracturing acidification, and extend the effective time of fracturing acidizing treatment. Cationic Additive in Acid and Fracturing Fluid has good compatibility with other fracturing acidizing fluid systems, is easy to construct and prepare, is harmless and odorless.

CAS: 27308-78-7 Poly Epi-Amine

Poly Epi-Amine are liquid cationic polymers of different molecular weights. As the main flocculant and charge neutralizer, they play a very good role in the liquid-solid separation process in various industries. CAS:27308-78-7 MW:(C5H12NO·Cl)n Synonyms:1,2-Ethanediamine,homopolymer;Ethylenediamine

CAS No. 111-28-4 | TRANS,TRANS-2,4-HEXADIEN-1-OL

Name: TRANS,TRANS-2,4-HEXADIEN-1-OL CAS No.111-28-4 MF:C6H10O MW:98.14 Purity:98% Package: 5g,25g,200g,500g,1kg Worldwide Delivery

CAS No. 6028-61-1 | Dipropyl trisulfide

Name: Dipropyl trisulfide CAS No. 6028-61-1 MF:C6H14S3 MW:182.37 Purity:98% Package: 5g,25g,200g,500g,1kg Worldwide Delivery

CAS No. 629-45-8 | Butyl disulfide

Name: Butyl disulfide CAS No.629-45-8 MF:C8H18S2 MW:178.36 Purity:98% Package: 5g,25g,200g,500g,1kg Worldwide Delivery

CAS No. 533-98-2 | 1,2-Dibromobutane

Name: 1,2-Dibromobutane CAS No.533-98-2 MF:C4H8Br2 MW:215.91 Purity:98% Package: 5g,25g,200g,500g,1kg Worldwide Delivery